Table of Contents
Advertisement
NOTE:
To register the printer to the Google Cloud Print service, the printer needs to be connected to the Internet.
NOTE:
Google Cloud Print supports only IPv4 connection.
NOTE:
If the printer is connected to a network that uses a proxy server, you need to specify the settings in Proxy Server from the
Dell Printer Configuration Web Tool. For more information, see "Proxy Server."
NOTE:
Acquire a Google account and a Gmail address in advance.
Enabling Google Cloud Print on the Printer
When using the operator panel
1 Press the
(Menu) button.
2 Press the
button until Admin Settings is highlighted, and then press the
3 Press the
button until Network is highlighted, and then press the
4 Press the
button until Protocols is highlighted, and then press the
5 Press the
button until Google Cloud Print is highlighted, and then press the
6 Ensure that Enable is highlighted, and then press the
7 When the message This Setting Becomes Effective after Restart is displayed, press the
(Back) button.
8 Turn off the printer, and turn it on again to apply the settings.
When using the Dell Printer Configuration Web Tool
1 Launch the Dell Printer Configuration Web Tool by entering IP address of the printer in your web browser. For
more information, see "Setting Up the Dell Printer Configuration Web Tool" and "Starting the Dell Printer
Configuration Web Tool."
2 When the Dell Printer Configuration Web Tool opens, go to the pages in the Print Server Settings tab. Click Port
Settings. In Port Status, select the On check box for Google Cloud Print.
Selecting the Version of the Google Cloud Print Service
Select the version of the Google Cloud Print service from either version 1.1 or version 2.0.
Google Cloud Print version 1.1 sends the print data to the printer via Internet. For this version, the printer needs to
be connected to the Internet.
206
Printing
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
