Setting Up The Queue - Dell S2810dn User Manual

For the 64-bit architecture
su
(Type the administrator password)
rpm –ivh (Type the file path)/Dell-Printer-
S2810dn-*.*-*.x86_64.rpm
The printer driver is installed.

Setting Up the Queue

To execute printing, you must set up the print queue on your workstation.
1 Select Computer More Applications..., and select YaST on the Application Browser.
2 Type the administrator password, and click Continue.
YaST Control Center is activated.
3 Select Hardware on YaST Control Center, and select Printer.
The Printer Configurations dialog box opens.
For network connections:
Click Add.
a
The Add New Printer Configuration dialog box opens.
Click Connection Wizard.
b
The Connection Wizard dialog box opens.
Select Line Printer Daemon (LPD) Protocol from Access Network Printer or Printserver Box via.
c
Type the IP address of the printer in IP Address or Host Name:.
d
Select Dell in the Select the printer manufacturer: drop-down menu.
e
Click OK.
f
The Add New Printer Configuration dialog box appears.
Select Dell Printer S2810dn vx.x PS [Dell/Dell_Printer-S2810dn.ppd.gz] from the Assign Driver list.
g
NOTE:
You can specify the printer name in Set Name:.
Confirm the settings, and click OK.
h
For USB connections:
Click Add.
a
The Add New Printer Configuration dialog box opens.
The printer name is displayed in the Determine Connection list.
Select Dell Printer S2810dn vx.x PS [Dell/Dell_Printer-S2810dn.ppd.gz] from the Assign Driver list.
b
NOTE:
You can specify the printer name in Set Name:.
Confirm the settings, and click OK.
c
86
Installing Printer Drivers on Linux Computers (CUPS)