Download  Print this page

When Using The Tool Box - Dell S2810dn User Manual

Smart printer.
Hide thumbs

Advertisement

10 Use the number pad to enter the first octet of the IP address, and then Press the
The cursor moves to the next digit.
NOTE:
You can only enter one octet at a time and must press the
11 Enter the rest of the octets, and then press the
NOTE:
If the message
(
)
Back
button.
12 Press the
(Back) button.
13 Press the
button until Subnet Mask is highlighted, and then press the
14 Repeat steps 10 and 11 to set Subnet Mask.
NOTE:
If the message
(
)
Back
button.
15 Press the
(Back) button.
16 Press the
button until Gateway Address is highlighted, and then press the
17 Repeat steps 10 to 12 to set the Gateway Address.
18 Turn off the printer and then turn it on again.

When Using the Tool Box

1 Click Start
All Programs
The Tool Box opens.
2 Click the Printer Maintenance tab.
3 Select TCP/IP Settings from the list at the left side of the page.
The TCP/IP Settings page appears.
4 Select the mode from IP Address Mode, and then enter the values in IP Address, Subnet Mask, and Gateway
Address.
5 Click Apply New Settings to take effect.
You can also assign the IP address to the printer when installing the printer drivers with the installer. When you use the
Wireless or Ethernet Connection feature, and the Get IP Address is set to AutoIP or DHCP on the printer, you
can set the IP address from 0.0.0.0 to the desired IP address on the printer selection window.
(Set) button.
This Setting Becomes Effective after Restart
This Setting Becomes Effective after Restart
Dell Printers
Dell Smart Printer - S2810dn
button.
button after entering each octet.
is displayed, press the
(Set) button.
is displayed, press the
(Set) button.
Tool Box.
Setting the IP Address
63

Advertisement

Table of Contents

   Also See for Dell S2810dn

   Related Manuals for Dell S2810dn

Comments to this Manuals

Symbols: 0
Latest comments: