Fog
Action
1
Is the whole page printed light?
2
Start Developer Stir Mode.
Launch the Tool Box, click Developer Stir Mode on the Diagnosis
a
tab.
Click Start.
b
Is the problem recovered?
Bead-Carry-Out (BCO)
Action
1
If the printer is installed in a high altitude location, set the altitude of
the location.
Launch the Tool Box, and click Adjust Altitude on the Printer
a
Maintenance tab.
Select the value close to the altitude of the location where the printer
b
is installed.
Is them problem recovered?
218
Troubleshooting
Yes
No
Contact Dell.
Go to action 2.
The task is complete.
Contact Dell.
Yes
No
The task is complete.
Contact Dell.