Dell S2810dn User Manual page 120

IPP Printer URI
Connection Time-
Out
Port Number
Maximum Sessions
WSD Port Number
Receive
Time-Out
Notification Time-
Out
Maximum Number
of TTL
Maximum Number
of Notification
FTP Password
Re-enter Password
Connection Time-
Out
HTTP Port Number
Simultaneous
Connections
CSRF Protection
Connection Time-
Out
Telnet Password
Re-enter Password
Connection Time-
Out
SMB
Purpose:
To specify the setting of the Server Message Block (SMB) protocol.
Values:
Host Name
Workgroup
Maximum Sessions
Unicode Support
Auto Master Mode
Encrypt Password
Job Time-Out
Connection Time-Out
120
Dell™ Printer Configuration Web Tool
Displays the printer URI.
Sets the connection time-out period from 1 to 1,000 seconds.
Displays the port number for receiving requests from the client.
Displays the maximum number of connections received simultaneously by the client.
Sets the port number to 80 or from 8000 to 9999.
Sets the receive time-out period from 1 to 65,535 seconds.
Sets the notification time-out period from 1 to 60 seconds.
Sets the maximum number of TTL from 1 to 10.
Sets the maximum number of notifications from 10 to 20.
Sets the password for FTP.
Enter the password again to confirm it.
Sets the connection time-out period from 1 to 1,000 seconds.
Sets the port number to 80 or from 8000 to 9999.
Displays the maximum number of simultaneous connections.
Displays the CSRF Protection setting.
Sets the connection time-out period from 1 to 255 seconds.
Sets the password for Telnet.
Confirms the set password.
Sets the connection time-out period from 1 to 1,000 seconds.
Sets the host name of the server computer.
Sets the workgroup.
Sets the maximum number of sessions.
Sets whether to notify the host name and workgroup name in Unicode characters during
SMB transmission.
Sets whether to enable the Auto Master Mode.
Sets whether to encrypt the password.
Sets the job time-out period between 60 and 3,600 seconds.
Sets the connection time-out period between 60 and 3,600 seconds.