Configuring Dual Vas Id - Meridian Link/Customer Controlled Routing Installation And Upgrade Manual

Configuring Dual VAS ID

Table 135
LD 23ÑConfiguring Dual VAS ID
Chapter 12: Meridian 1 configuration for Meridian Link/CCR 353
Overlay 23 is modified to prompt for ISAP and VASID for Meridian Link
even if the DN type is Meridian Mail ACD-DN. To configure an ACD-DN
as Meridian Mail DN, type YES in response to prompts MWC, IMS, CMS,
IMA and IVMS.
Prompt Response
REQ NEW
TYPE ACD
CUST 0-99
ACDN xxxx
MWC YES, NO
IMS YES, NO
CMS YES, NO
IMA YES, NO
IVMS YES, NO
EES YES, NO
VSID 0-15
¥
¥
¥
ISAP YES, NO
VSID 0-15
¥
¥
¥
REQ END
Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide
Comment
New
Automatic Call Distribution data block
Customer number
AC Directory Number
Value Added Server Identifier ID; must
be identical to the VSID defined in LD17.
Press [Return] until the ISAP prompt
appears.
Type YES to send AML messages to
Meridian Link.
Value Added Server Identifier ID; must
be identical to the VSID defined in LD17.
Press [Return] until the REQ prompt
appears.
Exit the overlay