Meridian Link/Customer Controlled Routing Installation And Upgrade Manual page 352

334 Chapter 12: Meridian 1 configuration for Meridian Link/CCR
553-3202-210 Standard October 1998
Table 122
LD 15ÑDefine status message groups (continued)
Prompt Response
¥
¥
¥
REQ END
Comment
Default values are in group 0 and
group 1:
Group 0 = sends no messages
Group 1 = sends all messages
Groups 0 and 1 may be used in LD 10
and LD 11 in response to the IAPG
prompt.
Precede with ÒXÓ to remove a status
event from a group.
Note: Groups 10 through 15 are
available only in X11 Release 17 or later
software.
Press [Return] until the REQ prompt
appears
Exit the overlay, saving changes
Ñ end Ñ