Meridian Link/Customer Controlled Routing Installation And Upgrade Manual page 331

Chapter 12: Meridian 1 configuration for Meridian Link/CCR 313
Table 110
LD 48ÑLink Diagnostic (continued)
Command
FLSH
STAT MON
ENL PACI/PACO
xx
DIS PACI/PACO xx
ENXM
MSGI/MSGO xx
<msg> <msg>
DSXM
MSGI/MSGO xx
ENIM
MSGI/MSGO xx
<msg> <msg>
DSIM
MSGI/MSGO xx
DSXP
MSGI/MSGO xx
ENIP
MSGI/MSGO xx
yy
DSIP
MSGI/MSGO xx
ENXT
MSGI/MSGO xx
<l> <s> <c> <u>
DSXT
MSGI/MSGO xx
Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide
Comment
Disable monitor and trash buffers
Get status of message monitoring
Enable packet input/output monitoring (xx=link)
Disable packet input/output monitoring (xx=link)
Enable message input/output monitoring
excluding those messages specified (xx=link)
Disable exclusive message monitoring (xx=link)
Enable inclusive message input/output monitoring
of only those messages specified (xx=link)
Disable inclusive message monitoring (xx=link)
Disable exclusive priority message monitoring
(xx=link)
Enable inclusive message input/output monitoring
of only those messages with specified priorities yy
on link xx
Disable inclusive priority message monitoring on
link xx
Enable message input/output monitoring
excluding messages with specified TN on
link xx
Disable exclusive TN message monitoring on link
xx
Ñ continued Ñ