Usrobotics Sportster Modem - Meridian Link/Customer Controlled Routing Installation And Upgrade Manual

USRobotics Sportster modem

The USRobotics Sportster (14.4) modem allows you to extend the distance
between the IPE Module or the Application Module and any connected
peripheral equipment.
The switch settings are shown in the following table.
Table 102
USRobotics Sportster switch settings
Switch setting
1
2
3
4
5
6
7
8
Note: When dialing up the system, you may need to send several
<BREAK> commands from your remote end to the system in order to
bring up the login prompt. The systemÕs baud rate may be different
from the modem baud rate therefore sending the <BREAK> command
causes the system to cycle through various baud rates. When the
system reaches the correct baud rate, you will see the login prompt on
your remote screen.
Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide
Chapter 11: Peripheral device cabling interface 279
Position Description
Up DTR Normal
Up Verbal result codes
Down Display result codes
Up Echo offline commands
Up Auto answer
Up Carrier detect normal
Down Load factory defaults
Down Smart mode