Configure Sdi Port For Conshare (X11 Release 17) - Meridian Link/Customer Controlled Routing Installation And Upgrade Manual

Configure SDI port for conshare (X11 Release 17)

Table 111
LD 17ÑConfigure SDI port (X11 Release 17)
Chapter 12: Meridian 1 configuration for Meridian Link/CCR 315
The SDI port is used for the optional console sharing feature, which allows
the IPE Module or the Application Module console to access Meridian 1
administration and maintenance programs. Port settings on the card should
reflect TTY mode at 2400 baud. Define the SDI port and its characteristics
by responding to the following prompts in LD 17.
Prompt Response
REQ CHG
TYPE CFN
PWD2 <cr>
ISDN <cr>
PARM <cr>
CEQU <cr>
OVLY <cr>
IOTB Yes
HIST <cr>
ADAN NEW TTY x
ESDI <cr>
USER MTC SCH
VAS <cr>
VSID <cr>
DLOP <cr>
CMS <cr>
SECU <cr>
ATRN <cr>
Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide
Comment
Create or change information in the database
Configuration record data block
Change I/O terminals or devices
Add SDI on port x (0Ð15) for console sharing
Use this port for service change and
maintenance
ÑcontinuedÑ