Option 21Ð81 Esdi Or Msdl Configuration - Meridian Link/Customer Controlled Routing Installation And Upgrade Manual

308 Chapter 12: Meridian 1 configuration for Meridian Link/CCR
Option 21Ð81 ESDI or MSDL configuration
553-3202-210 Standard October 1998
Table 109
LD 17ÑConfigure ESDI or MSDL port (Options 21Ð81)
Prompt Response
REQ CHG
TYPE CFN
ADAN NEW AML x
CTYP MSDL, ESDI
DNUM 0Ð15
PORT 0Ð3
DES aaa....a
BPS 19200
PARM R232 DCE
CLOK INT
IADR 3
Comment
Create or change information in the
database
Configuration record data block
Add AML on port x (VASID 0Ð15)
Card type is MSDL or ESDI
Device number; physical port for
AML on ESDI, physical card address
for MSDL
Port number on MSDL card (this
prompt only appears for MSDL)
AML port designation (such as
ÒMeridian LinkÓ)
19,200 bps baud rate (19.2 kbps).
The AML (connection from ESDI to
the IPE Module or the Application
Module) rate must match the baud
rate of link 0 on the IPE Module or
the Application Module.
Interface and transmission mode
(MSDL port only)
Internal clock (this prompt only
appears for ESDI)
Individual address for the data-link
level HDLC protocol
ÐcontinuedÐ