Electrical equipment
Air bag
Bravo-Brava
5.
* n * i
1. Remove the air bag from the steering
wheel.
Following removal, unactivated air
bag modules should immediately be
placed in a specially marked cabinet
and locked away.
The module should be placed with
the metal part resting on the surface
as shown in the figure.
REMOVING CLOCK SPRING
Preliminary operations
Remove the air bag as described on the previ
ous page. Then proceed as follows.
2. Align the wheels and lock the steering
column throughout all clock spring re
moval and refitting operations.
3. Diesel versions: unscrew screw retaining
advance handle to allow removal of the
lower steering column trim.
4. Disconnect the lower steering column
trim and unscrew the three cross-headed
screws indicated by the arrows.
108
VI -98 - Supursucvs previous vers-ian
Publication no. 506.670/74