Electrical system
Fiat CODE
Bravo-Brava
55.
Mechanical breakage of main key in door / bonnet lock notch
MASTER
key easily
found by the customer
yes
no
yes-
Set of keys with old
mechanical code avail
able as spare
no
Available spare key
yes
no
yes-
Set of keys with old
mechanical code avail
able as spare
no
Code Card available
yes
no yes-
Set of keys with old
mechanical code avail
able as spare
no
yes
Set of keys with old
mechanical code avail
able as spare
no
The notches are replaced. Possession of the car is obtained
by means of the spare key, if it is considered appropriate;
the key set can be completed by the REMEMORIZATION
procedure using the old MASTER key.
The notches are replaced. The transponder from the MAS
TER key of the old set must be inserted in the MASTER key
of the new set, and the new keys must be memorized by
means of the REMEMORIZATION procedure.
The notches are replaced. Possession of the car is retained
by means of the spare key, if it is considered appropriate;
the key set can be completed by the REMEMORIZATION
procedure using the old MASTER key once it has been ob
tained.
It is sufficient to replace the perimetral lock notches. After
regaining possession of the MASTER key, the ignition
notch can be replaced and the new set of keys can be mem
orized by inserting the transponder of the MASTER key
from the old set in the MASTER key of the new set, activat
ing the REMEMORIZATION procedure.
The notches are replaced. Possession of the car is regained
either by the EMERGENCY PROCEDURE or by bringing
the handle of the broken key up to the aerial while switch
ing on the ignition (+15), to be done using the MASTER
key of the new set. Once the MASTER key has been re
gained, the ket set can be completed by means of the RE
MEMORIZATION procedure.
The notches are replaced. Possession of the car is regained
either by the EMERGENCY PROCEDURE or by bringing
the handle of the broken key up to the aerial while switch
ing on the ignition (+15), to be done using the MASTER
key of the new set. Once the MASTER key has been re
gained, the new key set can be memorized by inserting the
transponder of the MASTER key from the old set in the MA
STER key of the new set and activating the REMEMO
RIZATION procedure.
The notches are replaced. Possession of the car is regained
only by bringing the handle of the broken key up to the aeri
al while switching on the ignition ( + 15), to be done with
the MASTER key of the new set. Once the MASTER key
has been regained, the key set can be completed by means
of the REMEMORIZATION procedure.
The notches are replaced. Possession of the car is only re
gained by bringing the handle of the broken key up to the
aerial while switching on the ignition ( + 15), to be done
with the MASTER key of the new set. Once the MASTER
key has been regained, the new key set must be memorized
by inserting the transponder of the MASTER key from the
old set in the MASTER key of the new set and activating the
REMEMORIZATION procedure.
80
Publication no.
506.670/01