Clock; Units; Voice Response; Touch Screen Beep - Fiat Freemont Owner's Handbook Manual

Then, as you continue, the information will display in
KNOWING
the selected language.
YOUR
VEHICLE

• Units

Press the Units soft-key to change this display. When in
this display you may select to have the EVIC, odometer,
SAFETY
and navigation system (for versions/markets, where
provided) changed between US and Metric units of
measure. Press US or Metric followed by pressing the
STARTING
AND
arrow back soft-key. Then, as you continue, the infor-
DRIVING
mation will display in the selected units of measure.
WARNING
• Voice Response (for versions/markets, where
LIGHTS
provided)
AND
Press the Voice Response soft-key to change this dis-
MESSAGES
play. When in this display you may change the Voice
Response Length settings. To change the Voice Re-
IN AN
EMERGENCY
sponse Length press and release the Brief or Long
soft-key followed by pressing the arrow back soft-key.

• Touch Screen Beep

SERVICING
AND CARE
Press the Touch Screen Beep soft-key to change this
display. When in this display you may turn on or shut off
the sound heard when a touch screen button (soft-key)
TECHNICAL
is pressed. To change the Touch Screen Beep setting
SPECIFICATIONS
press and release the On or Off soft-key followed by
pressing the arrow back soft-key.
CONTENTS
32

Clock

• Set Time
Press the Set Time soft-key to change this display.
When in this display you may select the time display
settings. To make your selection, press the Set Time
soft-key, adjust the hours and minutes using the up and
down soft-keys, select AM or PM, select 12 hr or 24 hr
followed by pressing the arrow back soft-key when all
selections are complete.
• Show Time Status (for versions/markets, where
provided)
Press the Show Time Status soft-key to change this
display. When in this display you may turn on or shut off
the digital clock in the status bar. To change the Show
Time Status setting press and release the On or Off
soft-key followed by pressing the arrow back soft-key.
• Sync Time (for versions/markets, where provided)
Press the Sync Time soft-key to change this display.
When in this display you may automatically have the
radio set the time. To change the Sync Time setting
press and release the On or Off soft-key followed by
pressing the arrow back soft-key.