Bravo-Brava
Bodywork
Window glasses
70.
REPLACING THIRD FIXED WINDOW
Removing trim and protection from vehicle
The diagram below shows the components to be removed before moving onto the subsequent prepara
tion stages.
- Protect the outer perimeter of the third glass housing with adhesive tape
- Slightly lower the roof lining, then position the appropriate spacers.
1. Rear panel inner lining
2. Centre pillar cover
3. Rear pillar cover
4. Passenger grab handle
5. Fixed glass
6. Threaded reference pins
7. Retaining clips
P4AO57M01
NOTE It is preferable to cut the sealant working from inside the vehicle using an appropriate blade to
prevent scratching the bodywork.
Open the retaining clips (7) before cutting the sealant.
Copyright by Fiat Auto
57