Operation Sequence For Fitting Control Unitearth Lead Braid - Fiat Brava Service Manual

Bravo-Brava
Electrical equipment
Air bag
55.
NOTE Check the insulation retaining brack­
et is correctly positioned, then refit
the control unit by carrying out re­
moval instructions in reverse order.
Operation sequence for fitting control unit
earth lead braid
4. Proceed as follows to fit the control unit
earth lead braid: insulation retaining
bracket (1) -
Earth braid (2) - Screw (3).
Tighten bolt (3) to a torque of 0.8
daNm. Pass the earth terminal be­
tween the two anti-rotation tabs on
the sound insulation retaining brack­
et.
NOTE After the operation, check the system
using a FIA T/LANCIA TESTER or other
diagnostic tool.
Copyright Fiat Auto 11-98 - Supersedes previous version 11 fj/11