Fiat Brava Service Manual page 511

Bravo-Brava
Bodywork
Window glasses
70.
Refitting
- Fit the trim on the windscreen avoiding
touching the area where the adhesion pro­
moter (primer) has been applied with your
fingers.
- Carry out a test fitting to centre the wind­
screen perfectly and make reference marks.
The sliding retaining mountings lo­
cated In the lower part should sup­
port the windscreen towards the top
and keep It aligned with the roof.
Using a pneumatic gun, extrude a bead of
sealant along the perimeter of the wind­
screen as evenly as possible (if there is ex­
cess, level the bead using a slice of potato).
In the lower part of the windscreen
apply the sea/ant scrupulously fol­
lowing the figures given In the dia­
gram to prevent ft ending up on the
retaining mountings.
P4A051M03
Copyright by Fiat Auto
51