Electrical equipment
Recharging
Bravo-Brava
55.
P4A122L02
Removing-ref itting (1998 20V version)
Position the vehicle on a lift and drain the cli
mate control system (see section 50 - Auxil
iary units).
Remove the right light cluster following the
instructions given on page 19.
1. Raise the vehicle and loosen the belt ten-
sioner bearing, after having removed the
lower protective shield (see page 45).
2. Lower the vehicle and remove compressor
protection shown in the diagram.
3. Disconnect the electrical connection and
the pipe for the climate control system
shown.
4. Disconnect the pipe for the climate con
trol system from the compressor, working
from the housing for the light cluster pre
viously removed.
5. Loosen the fixing bolt for the alternator
mounting bracket.
122
Print no. 506.670/01