Eon Function (Enhanced Other Network); Scanning Programmed Stations (Scan Function); Stereo Transmitters - Fiat Brava Service Manual

Volume 2
Hide thumbs Also See for Brava:
Table of Contents

Advertisement

Bravo-Brava
Electrical equipment
Radio equipment
55.
EON Function (Enhanced Other Network)
In certain countries circuits which cover several transmitters broadcasting traffic information are
grouped together.
In these cases listening to the RDS TP station programme will be temporarily interrupted to receive traf­
fic information each time it is transmitted by one of the transmitters in the same circuit.
In order to exclude this function (EON), briefly press the "TP" switch (10) (the LED under the switch
will go out).
Scanning programmed stations (SCAN Function)
With this function it is possible to cyclically tune in, for 10 seconds at a time, to all the stations which
can be received which have been previously programmed on this band.
During scanning, when a station is tuned into, the LED under the switch where it is programmed comes
on and the number of the switch appears on the display.
Stations where the signal is too weak cannot be heard.
In order to select the SCAN function, pro­
ceed as described below:
- select the band desired;
- press the "SCAN" switch (16) (the LED
under the switch comes on).
It is possible to change the direction of the
search several times by pressing the "MODE
+" (9) or "MODE -" (7) switches.
In order to interrupt the scanning, press the
"SCAN" switch (16) again : the LED under
the switch will go out and the station present
at that moment will be heard.
Stereo transmitters
When the station is transmitting the programme in stereo, the symbol shown by the arrow in the diagram
below will appear on the display.
If the signal arriving is weak, the reproduction will be automatically switched from Stereo to Mono.
Copyright by Fiat Auto
50/11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bravo

Table of Contents