Bravo-Brava
Bodywork
Sun roof
70.
ADJUSTMENTS DURING
REFITTING
Adjustment of opening device.
For a correct synchronism between the elec
trical operation and the opening/closing of
the roof the parts concerned must be adjust
ed as follows:
1. position the rollers (1) for the pullies ex
actly at the start of the sliding duct (2),
before the reference mark shown by the
arrow;
2. refit the electric motor with reference A
corresponding to the micro-switch (3);
- lastly, refit the window.
Adjusting the window
3. If necessary, adjust the alignment of the
window with the profile of the roof using
the slots in the frame (4).
Adjusting the spoiler
4. At the edges of the spoiler (5) there are
two openings with slots (shown by the ar
rows) for fixing and alignment with the
vehicle profile.
Copyright by Fiat Auto
63