Rds Function (Radio Data System); Programming The Last Station Listened To; Automatic Programming In Rds2 Band (Autostore) - Fiat Brava Service Manual

Electrical equipment
Radio equipment
Bravo-Brava
55.
Programming the last station listened to
The last station listened to for each reception band is automatically kept in the memory and then tuned
into the moment the radio is switched on or the reception band is changed.
RDS FUNCTION (Radio Data System)
If you wish to select stations which transmit
on RDS (Radio Data System), press the
"RDS" switch (13) briefly (the LED under
the switch will come on).
Each time the switch is pressed, the stations
on"RDS1" (display shows "RDS-") or"RD-
S2" (display shows "RDS =") are selected.
The RDS system makes it possible, with the
transmitters enabled, to automatically tune
into the optimum frequency for the station
you have selected: you can therefore contin­
ue to listen to the stationwithout having to
alter the frequency when changing areas.
Naturally it must be possible to receive the
station being listened to in the area one is
passing through.
The name of the station transmitting on RDS
appears on the display.
Automatic programming in RDS2 band
(AUTOSTORE)
It is possible to memorize 6 stations in the
RDS2 band. If the RDS mode is set (RDS1
or RDS2), keep the "AS" switch (13) pressed
until the sound switches off.
The stations transmitting programmes on
RDS with the most powerful signal at that
moment will be automatically programmed at
buttons (1), (2), (3), (4), (5) and (6). A
maximum of 2 passages through the entire
frequency range are made with increasing
search sensitivity.
During the search the word "AST" appears
on the display. When the programming is
complete, the radio tunes in automatically to
the frequency programmed for button (1).
The activating of the Autostore
takes place if the RDS 7 or RDS2
band is set.
50/8
Print no. 506.670/06