Bravo-Brava
Electrical equipment
Recharging
55.
Overhauling
In the case of failed or irregular alternator
recharging, completely dismantle the alterna
tor and carry out the following checks:
- check the belt tension;
- check the tightening of the nut at the posi
tive alternator terminal (B + ), making sure
that the washer is fitted;
- check the tightening of the nut at the ener
gizing terminal (D+), making sure that the
washer is fitted;
- check the tightening of the nuts at the pos
itive connector block in the engine com
partment;
- check the tightening of the bolts fixing the
negative battery terminal on the bodyshell;
- check that the battery terminals are clean
and properly tightened.
1.
2.
3.
4.
Position the alternator as shown and re
move the plastic protection acting on the
tabs shown.
Undo the nuts shown in the diagram;.
Undo the bolts shown in the diagram.
Using a metal-cutter disconnect all the
contacts shown and remove the plate.
Copyright by Fiat Auto
115