Setting The Exact Time; Switching Priority - Time/Frequency; Disconnecting From The Supply - Fiat Brava Service Manual

Electrical equipment
Radio equipment
55.
M'3 nrimnn
ML. UU'UU
v
J
uU*UU
K 4
P4A522L04
4A232L
Bravo-Brava
Setting the exact time
- Keep the switch (15) pressed until the
double point on the display, between the
hours and the minutes, stops flashing and
the words " M 1 " or "M2" appear on the dis­
play depending on the display mode se­
lected;
- adjust the hours and minutes indicated on
the display, proceeding as described be­
low:
- decrease the hours by pressing switch (1);
- increase the hours by pressing switch (2);
- decrease the minutes by pressing switch
(3);
- increase the minutes by pressing switch
(4);
NOTE By pressing the switches briefly, the
hours and minutes are increased/de­
creased by one unit whilst by press­
ing them for longer the hours/min­
utes display is changed rapidly.
- Once the exact time is set, press the switch
(15) again briefly; the counting of the time
is started beginning from 0 seconds and it
is therefore possible to adjust the clock ex­
actly. The double point, between the hours
and the minutes, will start to flash and the
words " M 1 " or "M2" will appear on the
display.
Switching priority - time/frequency
Press switch (15) briefly to switch between
the display of the clock and the messages re­
lating to the Radio, Cassette or Compact Disc
functions for a duration of 10 seconds, after
which the indication, which has priority ac­
cording to the display mode selected, will
reappear automatically.
Disconnecting from the supply
If the radio is disconnected from the supply
(even for a short period) when it is connect­
ed once again the display will show "00 : 00"
with the figures flashing and the double point
fixed to indicate that the clock must be ad­
justed once again.
50/22
Print no, 506.670/06