Fiat Brava Service Manual page 584

Bodywork Brava
Replacing structural body panels
70.
Finishing operations
1. Correct any distortions to the panel using a hammer and dolly block.
2. Remove any weld slag using a disc grinder.
Checking alignments
1. Check the parallelism, openings and angles (this involves fitting the moving components previously
removed with seals and parts which, once fitted, make it possible to check that the operations have
been carried out correctly).
P4A120M01
Protections
1. Apply the electro-phoretic protective treatment to the areas previously involved in the welding.
2. Seal the joins between the replacment panels and the bodyshell, using IVl 854210 transparent acrylic
sealant or an equivalent product.
3. Proceed with the painting and waxing stage.
4. Apply wax based oil protective.
124
Print no. 506.670/01