Fault diagnosis
Analytical charts
Bravo-Brava
55D.
The left front brake pad wear warning light is not working
Bridge the BR coloured ca
ble at connector 89A with
an earth
OK
Not OK
Bridge the BR coloured ca
ble at the instrument panel 6
connector A pin 8 with an
earth
OK
Replace the left front brake
pad wear sensor 89, or re
store the continuity for the
M coloured cable between
connector 89A & the sensor,
or restore the connection to
earth
Restore continuity for the
BR coloured cable between
the instrument panel 6 con
nector A & connector 89A
Not OK
Check the condition of the
warning light Q in the instu-
ment panel 6
Not OK
Replace the warning light Q
OK
Check the condition of the
instrument panel 6
Not OK
Overhaul
panel 6
the
instrument
The fiont brake pad wear warning light is not working (Only for HGT trim level)
Bridge the BR coloured ca
ble at the instrument panel 6
connector A pin 8 with an
earth
OK
Restore
cont.
for
BR
coloured cable between in
strument panel 6 connector
A & the ultrasound welding
Not OK
Check the condition of the
warning light Q in the i n
strument panel 6
Not OK
Replace the warning light Q
OK
114
Print no. 506.670/02