Electrical equipment
Radio equipment
Bravo-Brava
55.
1. Grip both elements of tool 1860897000
and partly extrac the radio, then release
the two elements of the above tool from
the radio.
DO NOT extract the radio working
working from the glove compart
ment, but only use the two elements
of tool 1860897000, following the
procedure described previously.
2. Protect the area of the dashboard under
the radio using a cloth as illustrated in the
diagram.
3. Completely extract the radio; disconnect
connection D for the aerial cable and con
nectors A and B working in the following
way: push connectors A and B towards
the radio and press on the retaining
springs C shown in the inset and extract
them from the housing; then remove the
radio from the vehicle.
If the rubber terminal (1) for the centering
pin (2) remains inserted in the dashboard
cross member, remove it and fit it on the
actual pin.
REMOVING RADIO MODEL AD182H
4. Follow the same procedure described for
the removal of the radio model AD 182 L
until the disconnection of connectors A
and B, then disconnect the connector for
the Compact Disc (CD) (which can be
recognized by the three different colours)
acting, at the same time, on the retaining
springs shown in the inset.
55/1
Print no.
506.670/06