Fiat Brava Service Manual page 570

Bodywork Bravo-Brava
Replacing structural body panels
70.
Finishing operations
1. Correct any distortions to the panel using a hammer and dolly block.
2. Remove any weld slag using a disc grinder.
Protections
1, Apply the electro-phoretic protective treatment to the areas previouslyinvolved in the welding.
2. Seal the joins between the replacement parts and the bodyshell, using IVI 854210 transparent acrylic
sealant or an equivalent product.
3. Proceed with the painting and waxing stage.
4. Apply wax based oil protective.
110
Print no. 506.670/01