Fiat Brava Service Manual page 82

Bravo-Brava
Fault diagnosis
Analytical charts
55D.
Extract connectors 86 and
108 from their housings,
bridge the H/G coloured ca­
bles at connector 86 and in­
sert an ohmmeter between
the H/G coloured cables at
the lock assy connector 108
Not OK Restore the continuity for
the H/G coloured cables be­
tween the connector 86 and
the lock assembly 108
OK
Check the condition of the
left rear central locking mo­
tor 108
Not OK
Overhaul or replace the cen­
tral locking motor 108
The right rear central locking motor is not woiking (Non existent for the Bravo versions)
Extract connectors 112 and
87 from their housings,
bridge the H/G coloured ca­
bles at the central locking
control unit connector 112
and insert an ohmmeter be­
tween the H/G coloured ca­
bles of connector 87
Not OK Restore the continuity for
the H/G coloured cables be­
tween the ultrasound weld­
ing and the connector 87
OK
Extract connectors 87 and
109 from their housings,
bridge the H/G coloured ca­
bles at connector 87 and in­
sert an ohmmeter between
the H/G coloured cables at
the lock assy connector 109
Not OK Restore the continuity for
the H/G coloured cables be­
tween the connector 87 and
the lock assembly 109
OK
Check the condition of the
left rear central locking mo­
tor 109
Not OK Overhaul or replace the cen­
tral locking motor 109
Copyright by Fiat Auto
55