Clock Setting - Fiat 500 2016 User Manual

Clock Setting

To start the clock setting procedure:
1. Push the Settings button on the faceplate and then press the "Clock and Date" button
on the touchscreen.
2. Press the "Set Time" button on the touchscreen.
3. Press the "Up" or "Down" arrows to adjust the hours or minutes, then select the
"AM" or "PM" button on the touchscreen. You can also select 12hr or 24hr format by
pressing the desired button on the touchscreen.
4. Once the time is set press the "Done" button on the touchscreen to exit the time
screen.
NOTE:
In the Clock Setting Menu you can also select Display Clock. Display Clock turns the
clock display in the status bar on or off.
Equalizer, Balance And Fade
1. Push the Settings button on the faceplate.
2. Scroll down and press the "Audio" button on the touchscreen to open the Audio
menu.
3. The Audio Menu shows the following options for you to customize your audio set-
tings.
Equalizer
Press the "Equalizer" button on the touchscreen to adjust the Bass, Mid and Treble. Use
the "+" or "-" button on the touchscreen to adjust the equalizer to your desired settings.
Balance/Fade
Press the "Balance/Fade" button on the touchscreen to adjust the sound from the speak-
ers. Use the arrow buttons on the touchscreen to adjust the sound level from the front
and rear or right and left side speakers. Press the Center "C" button on the touchscreen
to reset the balance and fade to the factory setting.
Speed Adjusted Volume
Press the "Speed Adjusted Volume" button on the touchscreen to select between OFF, 1,
2 or 3. This will decrease the radio volume relative to a decrease in vehicle speed.
Surround Sound
Press the "Surround Sound" button on the touchscreen, select On or Off followed by
pressing the back arrow button on the touchscreen. When this feature is activated, it pro-
vides simulated surround sound mode.
ELECTRONICS
51