Refitting Air Bag - Fiat Brava Service Manual

Electrical equipment
Air bag
Bravo-Brava
P5-
^
y \ y^/
/ [ \ \ l
KjD£^/\f \
M^r
^^^|8Y)\/
^^w/f/r^Mi
^^^^^//°//3fifi
\ \ yt/ \r\ \ *t^ \—/ ^~V^~"^K^^
V/J*£-~^\ ^? i '
W^?\
\ \
/
REFITTING AIR BAG
Safety measures
Operations oh air bag system compo­
nents must be carried out by specially
trained personnel and safety measures
set out in the section beginning on
page 99 must be STRICTLY adhered
to.
Operation sequence
1. Before refitting the air bag, check that the
yellow lead attached to the clock spring
passes through the rubber slot.
2. Bring the driver's air bag up to its fitting
position on the steering wheel and tilt as
necessary.
3. Connect the yellow two-way connector
leading from.the clock spring to the air
bag connector.
4. Position the air bag carefully in its seat
and then tighten both 5 mm hexagonal-
headed socket screws retaining the air bag
to the steering wheel.
- w _ Check system operation by ensuring
S H panel warning light goes off.
NEVER CONNECT THE BATTERY
UNTIL INSTALLATION IS COM­
PLETE.
NOTA After refitting, check the system is
working properly by means of a FI­
AT/ LANC/A TESTER or other diag­
nostic instrument.
110/6 11-98 ■ Supersedes previous version Publication no. 506.670/14