Electrical equipment
Radio equipment
Bravo-Brava
55.
1
(
BKHSii ^
- c i d s -
For the AD 182 H model it is necessary to
take out the Security Code Card for the ra
dio removed from the Fiat Card envelope
and replace it with the one enclosed with
the new radio. Attach the old Code Card
to the radio replaced.
Take a new radio, then attach the center
ing pin complete with rubber terminal and
tighten it in the threaded housing at the
bottom of the radio. Proceed with the fit
ting, following the instructions given on
the previous page.
OPENING/CLOSING
ING FLAP
CASSETTE HOUS-
3. The operation of opening the cassette
housing access flap differs for the two
models:
- AD182L: exert pressure from the top
downwards at the point shown
in the diagram until the click of
the flap releasing can be heard.
- AD182H: press the button shown to auto
matically open the flap.
4. In order to close the flap (for both the
AD182L model and the AD182H model),
exert slight pressure at the point shown in
the diagram until the click of the flap at
taching can be heard.
B
(Pftffl/Tf
DIGITAL STEREO
EJECT
r ^*% \
55/3
Print no. 506.670/06