Fiat Brava Service Manual page 116

Bravo-Brava Fault diagnosis
Analytical charts
55D.
Check for voltage at the AR
cable connector D pin 5 of
the junction unit 4
Not OK Overhaul the junction unit 4
OK
Using a cable bridge pin
connector A &
(12,13)
junction
connector
unit 4
pin
18
14
E of the
OK Overhaul the junction unit 4
The left brake light is not working (Valid for S/SX/GT versions)
Check the condition of the
bulb
Not OK
Replace the bulb
OK
Check the condition of the
bulb holder
Not OK Overhaul or replace the bulb
holder
OK
Check for voltage at the RG
coloured cable for the left
rear light cluster 16
OK Overhaul or replace the light
cluster 16
Not OK
Check for voltage at the RG
coloured cable connector E
pin 12 of the junction unit 4
OK
Restore the continuity of the
RG coloured cable between
the junction unit 4, connec­
tor E & t h e light cluster 16
Copyright by Fiat Auto 89