Attaching A Transmission Terminal Id To The Document Being Sent; (Tx Terminal Id); Attaching A Transmission Terminal Id To The Document Being Sent (Tx Terminal Id) - Canon imageRunner 2220i User Manual

Attaching a Transmission Terminal ID to the
Document Being Sent
You can specify whether to attach a TX Terminal ID when sending a document. The
TX Terminal ID is printed at the top of the sent document.
Your telephone number, name, time, day, and date are printed, enabling the
receiving party to know who sent the document.
IMPORTANT
3
In the United States, this setting must be set to 'On'. According to recent amendments to
the FCC (Federal Communications Commission) rules governing the use of facsimile
equipment in the United States, the following sender information must be printed on
every facsimile transmission: your fax number; your personal name or company name;
and the time and date of transmission.
NOTE
•
If you set the TX Terminal ID to 'On', you can set the position that the TX Terminal ID
appears on the recording paper, and also set a telephone number mark.
•
If you send I-Fax documents, "IFAX" is printed on the recording paper regardless of the
telephone number mark set.
•
The default settings are as follows:
- TX terminal ID: 'On'
- Printing Position: 'Outside'
- Telephone number mark: 'FAX'
1
3-26

Attaching a Transmission Terminal ID to the Document Being Sent (TX Terminal ID)

(Additional Functions) © [Communications Settings]
Press
© [TX Settings] under <Common Settings>.

(TX Terminal ID)