Canon imageRunner 2220i User Manual page 178

8
Press [Reply-to].
9
Select a reply-to address © press [OK].
If Access Number Management for an Address Book is set to 'On', and you want
to select a destination that is stored with an access number or in a private
address book, press [Access Number] and enter the access number to specify
the address, and press [OK]. If you press [No Access Number], the destinations
that are not managed with the Access Number setting are displayed. (See
"Storing New Addresses (Store/Edit Address Book)," on p. 4-5.)
Store reply-to addresses in the address book beforehand. (See "Storing E-mail
Addresses," on p. 4-13.)
The address specified here is set as the address of the e-mail when the recipient
of the e-mail replies.
NOTE
•
For Recipient settings, see "Specifying a Destination Using the Address Book
(Address Book)," on p. 1-37.
•
You cannot select multiple destinations.
Configuring Send Settings (Send Settings)
1
1-157