Canon imageRunner 2220i User Manual page 79

1
1-58 Specifying a Destination Not Registered in the Address Book (New Address)
G
Using the Browse Key (NetWare (IPX)):
❑
Press the Protocol drop-down list © select [NetWare (IPX)].
❑
Press [Browse].
IMPORTANT
After turning the main power ON, you must wait for the time set in Startup Time
Settings from the Additional Functions screen to elapse before pressing [Browse].
Transmission to computers on the network is not possible until this startup time has
elapsed. (See Chapter 3, "Using a TCP/IP Network (Windows/UNIX/Macintosh)," in
the Network Guide.)