Canon imageRunner 2220i User Manual page 189

1
1-168 Configuring Send Settings (Send Settings)
NOTE
•
To select the name of the sender, it is necessary to register the name of the sender
beforehand. (See "Registering Sender's Names (Sender's Names (TTI))," on p. 1-
20.)
•
If you select [00] in the Sender's Names list, the name registered in the Unit Name
screen is displayed. (See "Registering the Name of the Company and Department
(Unit Name)," on p. 1-18.)
•
If SDL is set as the login service, the sender's name and e-mail address that you
registered in Device Information settings for this machine are displayed on the
From field, and the login user name and e-mail address that you registered for SDL
are displayed on the Sender field on the I-fax recipient's machine.
- If SDL or SSO is not set as the login service:
sender's name <e-mail address registered in Device Information settings for this
machine>
- If SDL is set as the login service:
sender's name <e-mail address registered in Device Information settings for this
machine> (From field)
login user's name <the login user's e-mail address> (Sender field)
•
If SDL is set as login service, you can send jobs only if the e-mail address of the
user who logged on to the machine is registered. For details of the registration, see
the MEAP SMS Administrator Guide.
•
If SSO is set as the login service, the sender's name and e-mail address that you
registered in Device Information settings for this machine are displayed on the
From field, and the login user's User login name (pre-Windows 2000) and e-mail
address that you registered for Active Directory or NetSpot Accountant are
displayed on the Sender field on the I-fax recipient's machine.
- If SDL or SSO is not set as the login service:
sender's name <e-mail address registered in Device Information settings for this
machine>
- If SSO is set as the login service:
sender's name <e-mail address registered in Device Information settings for this
machine> (From field)
login user's User login name <the login user's e-mail address> (Sender field)
•
If SSO is set as login service, you can send jobs only if the e-mail address of the
user who logged on to the machine through Active Directory or NetSpot
Accountant is registered. For details on the registration, consult your administrator
of Active Directory or NetSpot Accountant.
•
For instructions on storing an e-mail address of this machine, see the Network
Guide.