Sending A Job To A User Inbox - Canon imageRunner 2220i User Manual

7
1

Sending a Job to a User Inbox

You can store a scanned document to a User Inbox. This feature enables you to
specify the document name.
IMPORTANT
•
Documents stored in a User Inbox are automatically erased 3 days later. You can change
this setting from the Additional Functions screen. (See Chapter 5, "Setting/Storing the
Mail Box Settings," in the Mail Box Guide.)
•
Documents cannot be stored in inboxes in the following cases:
(The accuracy of the following values depends on the remaining capacity of the hard
disk).
- When 100 documents are already stored in a specified user inbox.
- When the inboxes being used collectively already contain 1,000 items.
- When the inboxes being used collectively already contain 3,700 pages of documents or
NOTE
•
It is important to delete unwanted documents or image data from your inbox to make
space available to store new documents.
•
For more information on the User Inbox feature, see the Mail Box Guide.
1-174 Configuring Send Settings (Send Settings)
Press (Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display. Press
is complete, press [Done].
Scanning starts.
When scanning is complete, the document is sent to the specified destination.
NOTE
If Preview is set to 'On', you can preview the images of documents before sending.
(See "Previewing Originals (Preview)," on p. 1-178.)
image data (using LTR Canon Standard Chart and Standard Mode.)
(Start) once for each original. When scanning