Setting Auto Redial (Auto Redial) - Canon imageRunner 2220i User Manual

Setting Auto Redial
Auto Redial is a function that automatically dials the other party again if the other
party cannot be dialed due to a busy line, for example, or if a sending error occurs
when you send fax documents.
If you set Auto Redial, you can set redial times, redial interval, and transmission
error redial.
NOTE
The default settings are as follows:
- Auto Redial: 'On'
- Redial Times: '2 times'
- Redial Interval: '2 minutes'
- TX Error Resend: 'Error and 1st page'
1
Press
Settings].
2
Press [TX Settings] under <Fax Settings> © press [Auto
Redial].
(Auto Redial)
(Additional Functions) © [Communications

Setting Auto Redial (Auto Redial)

3
3-51