Other Problems - Canon imageRunner 2220i User Manual

Quality of printed originals is uneven.
Cause : Is the platen glass of the other party's machine clean?
Remedy : Make a few copies using your machine. If the copies are not streaked, the
problem is in the other party's machine. Contact the other party and ask them to
clean their machine's platen glass, and send the document to them again.
The machine will not receive documents in the Confidential Fax Inboxes.
Cause1 : Did you set the Forwarding Conditions in Forwarding Settings correctly?
Remedy : Check the current Forwarding Conditions and inform the sender. (See Chapter
4, "System Manager Settings," in the Reference Guide.)
Cause2 : Are the Forwarding Conditions set to 'On'?
Remedy : The Forwarding Settings are not valid if you do not set the Forwarding
Conditions to 'On'. (See Chapter 4, "System Manager Settings," in the
Reference Guide.)
Cause3 : Does the machine have sufficient memory?
Remedy1 : Erase unwanted documents in the inboxes in order to increase the amount of
available memory. (See Chapter 4, "Using/Arranging Documents Stored in an
Inbox," in the Mail Box Guide.)
Remedy2 : Erase unwanted documents in the Confidential Fax Inboxes. (See Chapter 4,
"Using/Arranging Documents Stored in an Inbox," in the Mail Box Guide.)

Other Problems

Transmissions are slow.
Cause1 : Are you sending high resolution documents?
Remedy : Low resolution is recommended for sending documents containing text only.
Cause2 : Is ECM TX or ECM RX active for sending by fax in the TX Settings/RX Settings
(Fax Settings) in Communication Settings?
Remedy : Check the ECM TX and ECM RX in the TX Settings/RX Settings (Fax Settings)
in Communication Settings. (See "Specifying Whether to Use ECM Transmission
(ECM TX)," on p. 3-47, and "Specifying Whether to Use ECM Reception (ECM
RX)," on p. 3-55.)
When Problems Occur
5
5-5