Canon imageRunner 2220i User Manual page 200

NOTE
•
For details on specifying addresses using the Address Book, see "Specifying a
Destination Using the Address Book (Address Book)," on p. 1-37.
•
For details on specifying addresses not registered in the Address Book, see
"Specifying a Destination Not Registered in the Address Book (New Address)," on
p. 1-39.
•
For details on specifying addresses using the one-touch buttons, see "Specifying a
Destination Using One-Touch Buttons (One-Touch Buttons)," on p. 1-64.
•
For details on specifying addresses and settings using the favorites buttons, see
"Configuring the Favorites Buttons (Favorites Buttons)," on p. 1-66.
•
For details on specifying addresses using the directory listing on the server
(LDAP), see "Searching a Destination via a Server (Search on Server)," on p. 1-68.
•
For details on scan settings, see "Selecting a Scan Mode," on p. 1-83.
2
Press (Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display © press
scanning is complete, press [Done].
Scanning starts.
The Preview screen is displayed when scanning is complete.
NOTE
If Preview is set to 'Off', the Preview screen is not displayed. When scanning is
complete, the scanned data is sent to the specified destination.
3
Press [ ] or [ ] to specify the page that you want to verify.
(Start) once for each original. When
Previewing Originals (Preview)
1
1-179