Job Recall (Recall) - Canon imageRunner 2220i User Manual

Job Recall
This function allows you to recall the last three addresses, scan settings, and send
1
settings which have been set and then send the documents.
IMPORTANT
•
A send job is defined by specifying the address, scan setting, send setting, etc., and by
pressing
If
activated, the send setting you have made cannot be stored into memory, so you cannot
call up the send setting by pressing [Recall].
•
The Standard mode cannot be stored in memory.
•
Identical send settings are stored only once in Recall memory.
•
If Access Number Management for an Address Book is set to 'On', you cannot use the
Recall mode.
NOTE
The three settings that were stored in memory will not be erased even when the power is
turned OFF.
1
1-184

Job Recall (Recall)

(Recall)
(Start) or (Reset), or allowing the Auto Clear function to activate.
(Start) or (Reset) is not pressed, or the Auto Clear function has not been
Place your original © press [Recall].