Canon imageRunner 2220i User Manual page 74

❑
Press [User] © enter the user name © press [OK].
A user name is a series of characters for logging on to a file server. In this
entry box, enter the user name that is registered in the file server on the
network as the destination of the send job.
To send documents to an imageWARE Document Manager folder, enter the
user name that you registered for the imageWARE Gateway series.
You can enter up to 24 characters when FTP or NetWare (IPX) is selected as
the server protocol for the user name.
If 'Windows (SMB)' is selected as the server protocol, enter the required user
name information in the manner shown below:
- To enter the user name only
Example: user_name
Maximum 20 characters
- To enter the user name and the domain name
Example: domain_name\user_name
Domain name: Maximum 15 characters
User name: Maximum 20 characters
- To enter a UPN (User Principal Name)
Example: user_name@domain_name.com
Maximum 128 characters
Specifying a Destination Not Registered in the Address Book (New Address)
1
1-53