Users In The U.s.a; Pre-Installation Requirements For Canon Facsimile; Equipment - Canon imageRunner 2220i User Manual

Users in the U.S.A

PRE-INSTALLATION REQUIREMENTS FOR CANON FACSIMILE

EQUIPMENT

I Location
Supply a suitable table, cabinet, or desk for the machine. See Chapter 8, "Appendix," in
the Reference Guide for specific dimensions and weight.
I Order Information
1. Only a single telephone line (touch-tone or rotary) should be used.
2. Order an RJ11-C modular wall jack (USOC), which should be installed by the telephone
company. If the RJ11-C wall jack is not present, telephone/facsimile operation is not
possible.
3. Order a normal business line from your telephone company's business representative. The
line should be a regular voice grade line or an equivalent one. Use one line per unit.
DDD (Direct Distance Dial) line
-or-
IDDD (International Direct Distance Dial) line if you communicate overseas
NOTE
Canon recommends an individual line following industry standards, i.e., 2500 (touch-
tone) or 500 (rotary/pulse dial) telephones. A dedicated extension off a PBX (Private
Branch Exchange) unit without "Call Waiting" can be used with your facsimile unit. Key
telephone systems are not recommended because they send nonstandard signals to
individual telephones for ringing and special codes, which may cause a facsimile error.
I Power Requirements
The machine should be connected to a standard 120 volt AC, three-wire grounded outlet
only.
Do not connect this machine to an outlet or power line shared with other appliances that
cause "electrical noise." Air conditioners, electric typewriters, copiers, and machines of
this sort generate electrical noise that often interferes with communications equipment
and the sending and receiving of documents.
I Connection of The Equipment
This equipment complies with Part 68 of the FCC rules. On the rear panel of this
equipment is a label that contains, among other information, the FCC Registration
Number and Ringer Equivalence Number (REN) for this equipment. If requested, this
information should be given to the telephone company. (Note: REN is not required for
some types of analog or digital facilities.) This equipment cannot be used on public coin
service provided by the telephone company. Connection to party lines is subject to state
tariffs. (Contact the state public utility commission, public service commission or
corporation commission for information.)
Legal Notices xiii