Canon imageRunner 2220i User Manual page 130

4
Set a ratio by pressing [–] or [+] © press [Done] © [OK].
You can also enter values using
If you enter values using
values by pressing [–] or [+].
The display returns to the Send Basic Features screen and the copy ratio
appears.
NOTE
•
If you make a mistake when entering values, press
value.
•
If you enter a value outside the setting range, a message prompting you to enter
the appropriate value appears on the screen.
5
Press (Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display. Press
is complete, press [Done].
Scanning starts.
When scanning is complete, the document is sent to the specified destination.
NOTE
•
To return the copy ratio to 100%, press [Direct].
To cancel the scan setting, press the Scan Settings drop-down list © press [Option]
•
© [Cancel].
•
If Preview is set to 'On', you can preview the images of documents before sending.
(See "Previewing Originals (Preview)," on p. 1-178.)
•
To cancel all settings at once, press
Standard mode.)
- (numeric keys).
0 9
- (numeric keys), you can change the entered
0 9
(Start) once for each original. When scanning
(Reset). (The machine returns to the
Changing the Scan Settings
(Clear) © enter the correct
C
1-109
1