Canon imageRunner 2220i User Manual page 157

3
1
4
1-136 Changing the Scan Settings
Select the user preset key to name © press [Store Name].
NOTE
•
A user preset key already storing a scanning mode is indicated by a colored
triangle ( ) in the lower right corner of the key.
•
If you selected a user preset key in which a scanning mode has already been
stored, the current settings of that key are displayed.
•
If there are more scanning modes stored than are currently displayed, scroll
through the list by using [M] or [L].
Enter the new name © press [OK].
The name stored in the user preset key appears on the screen.
NOTE
•
For details on how to enter characters on the touch panel display, see Chapter 1,
"Before You Start Using This Machine," in the Reference Guide.
•
You can enter up to eight characters per line.
•
Two lines can be entered for a user preset key name.
•
If you press [OK] without entering any characters, the name of the user preset key
reverts to its current name (default P1 to P8).