Canon imageRunner 2220i User Manual page 106

3
Press (Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display. Press
is complete, press [Done].
Scanning starts.
When scanning is complete, the document is sent to the specified destination.
NOTE
•
To change the Scan mode setting, select [Option]. (See "Selecting a Scan Mode,"
on p. 1-83.)
•
You can register the changed settings. (See "Storing/Erasing Scanning Mode," on
p. 1-131.)
•
If the Preview key is lit, the Preview display setting is turned on, and you can verify
the images from the Preview screen before sending your documents. (See
"Previewing Originals (Preview)," on p. 1-178.)
•
To cancel all settings at once, press
Standard mode.)
(Start) once for each original. When scanning
(Reset). (The machine returns to the
Selecting a Scan Mode
1
1-85