Canon imageRunner 2220i User Manual page 53

1
1-32 Flow of Sending Operations
NOTE
•
If the Card Reader-C1 (optional) is attached, remove the control card. (See
Chapter 7, "Optional Equipment," in the Reference Guide.)
•
If you have set up Department ID Management, press
"Before You Start Using This Machine," in the Reference Guide.)
G If the following screen is displayed:
❑
Follow the instructions on the touch panel display, press
each original. When scanning is complete, press [Done].
When scanning is complete, the scanned data is sent to the specified
destination.
NOTE
If the Preview key is lit, the Preview display setting is turned on, and you can verify
the images from the Preview screen before sending your documents. (See
"Previewing Originals (Preview)," on p. 1-178.)
(ID). (See Chapter 1,
ID
(Start) once for