Selecting A Scan Mode - Canon imageRunner 2220i User Manual

Selecting a Scan Mode

You can set the scan mode that a document is scanned in. The machine has four
preset scan modes (Black 200dpi, Black 300dpi, Black 600dpi, Black 400dpi).
Select the desired mode from the preset scan modes or user defined scan modes
(user preset keys) according to the type of original you are sending.
NOTE
•
If you want to use less memory and make the sending time shorter, select a lower
resolution mode.
•
You can adjust the preset scan modes and create new scan settings. However, since
changed scan settings are not automatically saved, it is useful to register the new scan
settings if you use them frequently. (See "Storing/Erasing Scanning Mode," on p. 1-131.)
•
The default setting is 'Black 200dpi'. You can change the initial setting in Edit Standard
Send Settings, which is accessed by pressing
[Communications Settings] © [TX Settings] under <Common Settings>. (See "Setting the
Standard Send Settings (Edit Standard Send Settings)," on p. 3-12.)
•
You can change the currently registered settings in the four preset scan keys, and
register new ones.
•
In addition to the scan mode, you can register addresses and send settings in the
Favorites Buttons. (See "Registering Favorites Buttons (Store Favorites Button)," on p. 3-
15.)
1
Place your originals © specify the destination.
(Additional Functions) ©

Selecting a Scan Mode

1
1-83