Setting the Pause Time
This section describes how to set the pause time (in seconds) for fax sending.
Some overseas dialing may not be successful due to the distance or complex route
for connections when you dial the international access code, country code, and the
destination number all together. In such cases, insert a pause after the international
access code. Then the machine dials the number with a short waiting time where
the pause is inserted, which helps improve the connection.
NOTE
•
You can insert a pause on the screen in which you enter a fax number. (See "Specifying a
Fax Number," on p. 1-39.)
•
Pauses entered at the end of dialed telephone numbers are always 10 seconds long.
•
The default setting is '2 sec'.
1
Press
Settings].
2
Press [TX Settings] under <Fax Settings> © press [Pause
Time].
(Pause Time)
(Additional Functions) © [Communications
Setting the Pause Time (Pause Time)
3
3-49