Q
36
A
You can check the send job status from the Status Monitor/Cancel screen or check
that the sent transmission was completed using the Job Done Notice mode.
●
●
•
I have just sent an important document via facsimile. Can I
check to make sure that it was sent correctly?
To check from the Status Monitor/Cancel screen:
Press
(Status Monitor/Cancel) → [Send] → [Log]
→ check that the sent job is listed.
To receive send result via e-mail:
Press [Fax] → [Options] → [Job Done Notice] → specify
the e-mail address where you want to receive the
result.
If the Fax TX Report is set, you can output and check the Fax TX Report every time. Also, if the Fax Activity Report is set,
you can output and check Fax Report from the past. For more information, see e-Manual > Settings/Registration.